Robot settings

If you’re using macOS, you can start the system update manually via SSH. 
Make sure the robot is connected to the Internet.

1. Open Terminal
Press Command + Space, type Terminal, then press Enter.

2. Connect to NAO via SSH
In the Terminal, type the following command :

   > ssh nao@IP.OF.THE.ROBOT

   > Replace IP.OF.THE.ROBOT with the robot’s actual IP address.

Enter NAO’s password.  The default password is nao if it has not been changed.
Note: nothing appears on screen while you type the password. This is normal.

3. Start the system update
Once connected, run:

   > qicli call ALStore.updateSystem

The download may take several minutes, depending on your Internet connection. 
When the command returns true, the update has finished downloading.

4. Reboot the robot
Once the update is downloaded, reboot NAO.